ENVELO-SEAL™ spray applied polyurethane foam is a two component, medium-density, structural insulation system designed for commercial, residential, and industrial applications.
Closed-cell polyurethane foam yields a high R-value. Minimizes air and moisture infiltration. The spray applied nature of ENVELO-SEAL™ SPF allows for tremendous sealing properties which contribute to healthier homes and workplaces. The rigid nature of ENVELO-SEAL™ increases overall structural integrity resulting in more durable structures. ENVELO-SEAL™ expands during application to provide increased performance values by sealing the building envelope.
The ENVELO-SEAL™ system is comprised of an “A” component or aromatic diisocyanate, and a blended “B” component which includes polyols, fire retardant materials, catalysts, and non-ozone depleting blowing agents.
Recommended Uses:
• Roofs
• Walls
• Unvented Attics
• Ceilings
• Floors
• Vented Attics
• Piping
• Foundations
• Vented Crawl Spaces
• Concrete Slabs
• Ducts
• Tanks
• Cold Storage
• Freezers
• Cooler
Physical Properties:
Fungi Resistance: ASTM G-21 = Zero Rating
R-Value (aged): ASTM C-518 = 6.9 per inch, R-13 at 1.9 inches, R-19 at 2.75″, R-24 at 3.5″, R-37.8 at 5.5″, R-54.3 at 7.9″
Sound Transmission Coefficient: ASTM E-90-85/E413 = 43 (STC)
Noise Reduction Coefficient: ASTM 4-423 = 0.2 (NRC)
Compressive Strength: ASTM D-1621 = 15 – 20 psi
Core Density: ASTM D-1622 2.0 – 2.4 lbs/ft³
In Place Density: 2.5 lbs/ft³ Nominal
Closed Cell Content: ASTM D-2856 = >92%
Tensile Strength: ASTM D-1623 = 55 – 65 psi
Moisture Vapor Transmission: ASTM E-96 =
0.80 Perms at 1”
0.23 Pers at 3.5”
0.14 Perms at 5.5”
0.10 Perms at 7.9”
Dimensional Stability: ASTM D-2126 = % Change in volume = 6% (7 days at 158°F, 95%RH)
Air Leakage Rate: ASTM E-283 = 0.00 ±0.01 (L/s)/m²)